Foscam support. our faqs, support videos, and other resources will help you use foscam products to the best advantage.. When trying to access the camera settings via the foscam ip camera tool, the dialog was in some way broken displaying a load of question marks in place of text, and broken message “subnet doesn’t match, dbcli m”.. Basic setup for your foscam mjpeg ip camera this tutorial will show you how to connect to your foscam ip camera on a mac (lion). we start off by plugging the camera into the router and going on.
If you get the message”subnet doesn’t match, dbclick to change”, please go to step 2. if you can see ip address of camera, please go to step 3. step 2: set a proper ip address for camera. the first three numbers of camera’s ip address are the same as router which the camera is connected.. A prompt is displayed with a “subnet doesn’t match, dbclick to change!” message. click the left mouse button to choose the prompt and click the right mouse, choose network configuration to set the ip address of the camera to the same subnet as the lan. (figure 2.5) you can choose obtain ip from dhcp server or set a static ip for the camera.. Login your router and choose the status of lan, you can see the detailed information of subnet mask, gateway and dns server. in fact, router’s lan ip is just the gateway address. if you don’t know the dns server, you can set it same with gateway..
Note: Only a member of this blog may post a comment.